Washing Machinery Installation Environment Requirements And Life Improvement
1. About the installation site - since the whole body is made of stainless steel, the installation site should be a better place for sun protection, moisture protection and other work, to ensure that it will not be used in the follow-up because of a long time exposure to the sun and the wind and rain and rust fall off problem.
2. Due to the washing machine in the production will form a certain vibration and noise, so in order to maximize the stability of its operation, we should do a good job in the formation of the installation of the ground, and it is necessary to install, in the four corners of the fastening bolts, to maximize to ensure its stability.
3. The washing machine is an industrial machinery equipment, so its power supply should be industrial electricity with a voltage of up to 360V, do not use household electricity to bring to the washing machine, which will not only reduce the working performance of the machine itself, but also may be damaged due to undervoltage of motor, inverter, controller and other components.
4 washing machinery is a work will borrow a large number of water sources of mechanical equipment, and all the water is set in the top or edge of the inlet pipe to complete, so we will connect the water pipes and water supply, must ensure that the water pressure with up.
5. Some washing machines will also borrow steam in the work, and the requirement for steam pressure is 0.3-0.6mpa, so in the air source reference, we must do a good job in pressure control, to prevent under pressure and overpressure, because this will not only affect our washing effect, but also cause many safety accidents caused by excessive pressure in the inner cylinder.
